Fingerprint Brushes

Latent Print RapidChange™ Brush kit w/fluorescent print powder

RCB200. $59.50

With this interchangeable brush design, you will never have to worry about the cross contamination of powders. Once an area of the crime scene has been dusted for prints with one type of powder, disassemble the unit and attach a new brush head. Interchanging the heads is clean, quick, simple and efficient. The detachable handle is connected to and disconnected from the brush head while it is inside the protective tube, allowing for a cleaner handling of the equipment.RCB200 features four of our most popular fluorescent powders*: LL701 REDescent™, LL703 GREENescent™, LL705 YeLLOWescent™, and LL704 SILVER/ REDescent™. These powders work well on dark or multicolored surfaces. *Custom-ordered powders available upon request

Latent Print RapidChange™ Brush kit w/regular print powder

RCB100. $49.50

With this interchangeable brush design, you will never have to worry about the cross contamination of powders. Once an area of the crime scene has been dusted for prints with one type of powder, disassemble the unit and attach a new brush head. Interchanging the heads is clean, quick, simple and efficient. The detachable handle is connected to and disconnected from the brush head while it is inside the protective tube, allowing for a cleaner handling of the equipment. RCB100 contains four latent print powders*: 101L Silk Black, 102L Silk Gray, 103L Indestructible White, and SB201L Silver/Black powder. * Custom-ordered powders available upon request

The following products are for law enforcement agencies providing crime scene investigation, fingerprint identification, fingerprinting for detention, patrol and other applications.

Latent Products & Supplies:

122L. $10.95
Standard Size Fiberglass Brush, 1/4" dia. x 4 1/4"L"

"These are unquestionably the finest brushes available for developing latent fingerprints. Thousands of specially selected fiberglass filaments form a cloudlike, soft cluster that retains powder and eliminates the constant powder replenishment required for conventional brushes. They are produced on a perfectly balanced, machine-knurled, black anodized aluminum handle for the ultimate in control. The brush is supplied in a protective container and cap. Available in two sizes: Standard measures 4 1/4” long and Kit Size is 2 3/4” long. The reduced handle length makes the kit size brush an exact replacement for conventional brushes found in most fingerprint field kits now in use.

122L1. $9.95
Kit Size Fiberglass Brush, 1/4" dia. x 2 3/4"L"
These are unquestionably the finest brushes available for developing latent fingerprints. Thousands of specially selected fiberglass filaments form a cloudlike, soft cluster that retains powder and eliminates the constant powder replenishment required for conventional brushes. They are produced on a perfectly balanced, machine-knurled, black anodized aluminum handle for the ultimate in control. The brush is supplied in a protective container and cap. Available in two sizes: Standard measures 4 1/4” long and Kit Size is 2 3/4” long. The reduced handle length makes the kit size brush an exact replacement for conventional brushes found in most fingerprint field kits now in use. "

Brush-N-Burnish(tm) Carbosmoove II Brush BNB1000. $11.90
Brush-N-Burnish(tm) filament brushes would not be complete without the addition of this carbon fiber brush. The naturally smooth, low-friction and fine diameter filaments are randomly layered allowing for a quicker change between powder colors--just shake the brush free of powder. Its resistance to corrosion and moisture makes the BNB1000 the perfect choice even in extremely high humidity. Filament Length: 2-1/4"

Brush-N-Burnish(tm) Twisted Fiberglass Brush BNB600. $12.75
SIRCHIE rounds off our new line of fiberglass Brush-N-Burnish(tm) brushes with the BNB600. We've taken our highest quality fiberglass filaments and given them a TWIST. The result is a brush with an exceptionally long-wearing plume. After each use, the twisted fibers begin to unwind resulting in an extremely soft surface contact and maximum powder carrying capability. Filament Length: 1-3/4"

Replacement RapidChange™ Fiberglass Brush Head, ea.

RCB101. $4.50

Replacement head for RapidChange™ Fiberglass Brushes, Cat. No.'s RCB100 and RCB200

The DisposaBrush™ Fiberglass Brush. 122L1D. $3.45

The best way to eliminate this cross-contamination is to use one brush per scene. The 122L1D is one in a new line of disposable brushes from SIRCHIE®.The DisposaBrush™ has been constructed using our finest fiberglass filaments, mated to a glossy acrylic handle and is individually packaged in a contaminant-free, factory-sealed pouch

WHOPPING FEATHER DUSTER. 123lrwb. $11.25
newest addition to our Marabou Feather Duster family. Three times the volume of richly, luxurious Marabou down. Superb for use as a primary or secondary applicator of all latent print powders. Especially suited for large area applications. Each brush comes with an individual transparent tube and cap for storage when not in use. Available in black, white and red, white and blue.

SEARCH® REGULAR POWDER BRUSH. 118L. $4.25
general purpose brush is made of high-quality camel hair. The fine quality of the bristles permit dusting of target objects with a very fine coat of either fluorescent invisible or visible detection powder. The brush comes with a protective container and cap. Bristle length: 1 1/2". Overall length: 5 1/4".

LONG HANDLE BRUSH. LHB02. $14.25
This is the finest, high-quality, long handle latent print brush available. It is produced from selected, high-quality camel hair for latent powder applications only. The fine hair selection eliminates scratching ridge details. The handle is balanced for easy use. The LHB02 brush (pictured right margin) is supplied with a protective container and cap. The brush dimensions are9" x 1/2" dia. (22.9cm x 1.3cm dia.)