Glue Fuming

Portable Cyanoacrylate Fuming Chamber. $
Making it EASY to Fume at the Scene!

Latent print evidence is fragile at best. But if it could be fumed with Cyanoacrylate at the scene, you’d have the measure of protection needed during transit.

That’s why the CNA1000 is the KEY to convenience in Cyanoacrylate fuming! Its unique interlocking design requires no tools for assembly and sets up in a manner of minutes.

This light-weight unit (shown at left) consists of ...
- Six (6) precision laser-cut acrylic panels
- Two (2) steel evidence support rods
- Six (6) stainless steel evidence clips
- Five (5) FINDER™ Cyanoacrylate Packets
- and two (2) CYANO-BLOC™ Pre- and Post-Treatment Pads.

All these components are easily stored in an aluminum and black polypropylene carrying case (shown in photo-inset) for convenient transport to and from the crime scene.

ElectroFume™. $99.69
No. FUM250 Kit and Components Iodine Fumer
The FUM250 ElectroFume™ Iodine Fumer Kit has a dual purpose.
It saves your breath when fuming with iodine and provides a quick, efficient means of developing latent prints on porous surfaces such as paper, cardboard, raw wood, etc.
The FUM250 features a high-volume, battery-operated air pump. This handheld unit weighs a mere 14.1 oz. (400g) with batteries and is supplied with both Fumette Disposable Iodine Fuming Guns
and Iodine Print Enhancers. All of which are conveniently contained in a rugged ABS carrying case.

The CYANO-SHOT™ is one of the hottest new products to come along in the world of latent print development in quite some time. Utilizing the developmental properties of cyanoacrylate, this amazing product creates an abundant amount of heat, which decreases fuming time while providing quality ridge detail.

The CYANO-SHOT™ is ideal for use with any of SIRCHIE®’s fuming chambers, especially the new FA100 Disposable Fuming Chamber Combination, the FR150 Insta-FumeTent™ and the FR175A and FR175FG Shake-N-Fume™ disposable fuming chambers.

6 pk.	CNA3006.	*$21.95*
24 pk.	CNA3024.	*$68.95*
72 pk	CNA3072.	*$155.95*

ULTRA CYANO-SHOT™. $11.25
CNA4000
Latent Print Development
Latent Print Dev., Cyanoacrylate

ULTRA CYANO-SHOT™ features the same latent print development properties as our regular CYANOSHOT ™, but has a longer fuming time. This extra time allows you to develop latent prints in larger enclosed areas—fuming time lasts up to 20 minutes.

THE FINDER™ Cyanoacrylate Packets,

Latent Print Development
Latent Print Dev., Cyanoacrylate

THE FINDER™ is a unique gel formulation sandwiched between two layers of aluminum foil. Place the packet horizontally or vertically in a fuming chamber—without dripping any glue.

5 ea.	CNA2000	$15.96
20 ea.	CNA2001	$55.80
100 ea.	CNA2002	$232.40
300 ea	CNA2003	$680.00

Cyanoacrylate Fuming Chamber FR600. $969.00

The FR600 Laboratory Fuming Chamber was specifically designed to handle large volumes of physical evidence that are of a non-porous nature. The primary purpose of the chamber is for use with most Cyanoacrylate fuming methods. The chamber features three heating elements used for accelerating development of latent fingerprints when liquid cyanoacrylate compounds are used. The chamber is equipped with an inlet and outlet port, one on either side permitting the use of accessories such as the CYANOWAND™ and connection to the DeFumigator™ Cyanoacrylate Fume Extractor. The inlet port also allows connection of the PUM100 Portable Humidifier when adding moisture is required. The acrylic chamber door permits an unrestricted view of the contents during fuming procedures.Latent prints developed using cyanoacrylate are the result of the fumes from the compound combining with the moisture content of a latent print. When the fumes come into contact with this moisture, the process of polymerization takes place. This results in a hard, white residue conforming to the ridges of the latent print. Use of a fuming control card is recommended to aid in the determination of development time. A 220V AC version is available by ordering No. FR600220

FR300. $299.95

De-Fumigator.

SEARCH® CYANOWAND™ Kit SCW100
$153.95
Latent Print Development
Latent Print Dev., Cyanoacrylate The CYANOWAND™ is incredibly simple to use. Simply attach a cyanoacrylate cartridge, ignite and begin fuming. Hold the CYANOWAND™ several inches away from the suspect surface and sweep the wand back and forth. Latent prints develop as they’re fumed. The CYANOWAND™ also offers superb fuming capabilities when used with SIRCHIE®’s fuming chambers. Includes all the necessary materials to process latent fingerprints with cyanoacrylate fuming.Instructions are also included.

Portable Cyanoacrylate Fuming Chamber. $ Making it EASY to Fume at the Scene!

Portable Cyanoacrylate Fuming Chamber. $
Making it EASY to Fume at the Scene!